Gift flash drive with “satellite modem”

The idea of ​​the original gift matured long ago. But at the same time there was a desire to get by with little financial expenses and to devote less time to the manufacturing process. The result exceeded expectations. And not so much by appearance, but also by the opportunity to give it in the description, fantastic properties. Outwardly, this hack looks like a stub of a USB cable (which, in principle, it is). But when you connect it to a computer, the user gets at his disposal several gigabytes of memory. To the question: "What is this?" There are several possible answers, the most original of all - "This is a communication module with a virtual storage on the Internet, in which a satellite modem is integrated." In proof of this, you can show the tattered end of the cord. How funny it sounds, but they believe it: • Children up to 12-13 years old. • Blondes. • Indigenous people of Central Asia and the Caucasus. • • And all the rest who studied poorly at school. Now let's get started. We will need: • USB flash drive.But only miniature is suitable, in which the connector is larger than the case. • USB cord (dad). • • A sharp knife (or a razor blade is better). • • Second glue. • • File (it will fit small file).
Gift USB Flash Drive
Cut off 10 centimeters of cord with the port and remove the USB flash drive from the packaging.
 Gift USB Flash Drive
With a flash drive, remove all the plastic went ear, and the USB port is neatly cut along the commissure line on both sides.
 Gift USB Flash Drive
Do not cut to the end. The cord itself goes freely in the round part. Then we remove the metal part of the USB port from the shell and disassemble it.
 Gift USB Flash Drive
 Gift USB Flash Drive
For disassembly, unscrew the two teeth at the beginning of the cord , and slightly pry with a sharp tip of a knife. There are no adhesive joints anymore. Note that there are two microcaps on the sides. When assembling, they are useful for reference. At this point, you may be tempted to glue the disassembled flash drive directly into this plastic case. This is possible, but only the handicraft will be “sewn with white threads.” And there are two reasons for this: 1. Too small part of the flash drive will be in the USB port case. Even if you use good glue, then quickly the whole structure will break. 2. The empty part of the USB port will strongly betray the fake of the entire product. And therefore we will not deviate from the planned plan and we will disassemble the USB flash drive. There are no adhesive joints, but it sits very tightly in a metal case. It takes a little effort to extract. As a result, the content is born.
 Gift USB Flash Drive
This is not just the flash card itself, but the backing with the top seal. At this stage, one replacement should be made, which will give the finished product greater realism. You need the top seal, replace the white liner from the USB cord.
 Gift USB Flash Drive
And there are two reasons for this too: 1. The white liner fixes the entire structure much better, because it is held in the body with the entire surface (the native seal has an L-shaped profile). 2.After assembly, it looks more organic. Now everything is ready and you can start building.
 Gift flash drive
If necessary, the white liner should be cut slightly.
br>
Gift flash drive
Then gently push the whole design into the metal part of the USB port. Gift Flask > At the next stage, you will need a file (file). The fact is that the metal part of the USB stick is longer than the same part of the USB port.  Gift flash drive And for fixing the product, it is necessary that the side microscreens come in seats. The difference in length is not large - 1-1.5 mm., And they need to be removed by the nail file. And now all the elements of the construction are adjusted.  Gift flash drive Gently connect the metal parts of the product and clamp the two prongs at the beginning of the cord.
Gift flash drive
Gift flash drive
Check out the front of the flashcard.It should not protrude beyond the USB port.
 Gift flash drive
Pulling the cord, pull the metal part into the cut-out PVC case.
Gift USB Flash Drive We glue with glue and tightly compress the product. Let me give you some advice. When you press one part to the other, hold them through a plastic bag. If the glue protrudes, your fingers will not stick to the body. In the final you should cut the cord, leaving 5-7 cm and tear it to the end.
 Gift USB Flash Drive
And this is how the original USB flash drive with a" satellite interface "will look in the slot PC.
Gift flash drive

Date: 09.10.2018, 08:42 / Views: 63173

Related News


Scrub Bot Robot Cleaner
Arc Discharge
Crafts from CDs
Snowman in a shirt
Colorful joy for small things
PVC windows - comparison of characteristics and properties
Summer clay craft