Vulture

paper neck
To make such a neck, you have to try. Of course, such a task is beyond the power of a small child, but a student can easily fold this bird. The most difficult thing here is to hide a sharp corner inside the crafts in the upper part of the figure, and in other cases you just need to follow the instructions. Especially since it is very detailed. Take the paper denser than ordinary colored paper. It will be easier to work with it. Make a square from a rectangular sheet.
 sheet of paper
 bend the sheet
Fold it vertically in both directions. Expand.
tear off too much
 bend again
Bend the sheet horizontally and then vertically.
bend in half
Parties of two opposite squares connect. The diagonal line between them will beinside.
we double it in half
You will have such a folded square.
Bend both side
Bend both sides to the middle.
 bend down
Do the same from the back of the figure. Bend the upper part.
 Unbend the bends
Unbend the bends.
How to make a neck
Raise the top sheet. There you will see the markup.
 How to make a neck
For these folds, fold the sides of the sheet inwards.
 How to make a neck Turn the craft around and do the same.
 How to make a neck
Lower the upper part.
 How to make a neck
Bend the upper corner one third of the distance to the horizontal line and unbend again.
How toneck
If you look at the figure above, you will see a small square received from the fold.
 How to make a neck
Fix the sides with your fingers to bend. The two sides bend inward this square, and the front and back - connect.
How to make a neck

Fold the figure as it was before.
How to make a fingerboard
Take the lower corner of the craft and open it upwards. The lower part will be forked. To the right, draw a line from the center to the bottom side at a right angle. In the left bottom corner, divide into three parts and draw a line from the side corner through the bottom marking to the middle line.
 How to make a neck
Bend both details on these lines.
How to make a neck
Turn the right curved corner and bend it along the intended bends inwards. He will be "looking" up. Turn the left curved corner too.
 How to make a fretboard
Summarize it. Next to the fold, draw a line as shown in the photo. On the top "wing" draw a vertical line.
 How to make a neck
Bend the bottom corner downwards and the top corner to the left.
How to make a fingerboard
Turn the corner along the intended folds.
 How to make a neck
 How to make a fingerboard
 How to make a neck
Smooth. Bend it again as in the photo.
 How to make a neck
The bottom of this small triangle should be horizontal. This is a paw. Here is such a figure you have now.
 How to make a neck
Now lower its upper part down, as if closing it.The figure is already a little bit like a bird.
 How to make a fingerboard
Pay attention to the angle where the pointer is.
 How to make a fingerboard
It should be a little bit beyond the top part. This is the breast of the neck. Make it your head. Bend, looking up, the triangle to the right.
 How to make a fingerboard
Turn it out.
 How to make a neck
Fold the tip with it, making a beak. Remove it too.
 How to make a neck
There are markup in the upper part of the shape.
 How to make a neck
Bend both sides along them to the middle.
 How to make a neck
Turn right side to the left and the bent details will be inside.
How to make a fingerboard
Bend wings so thatso that they were on the same level with legs.
 How to make a neck
Your neck is ready.

Date: 09.10.2018, 09:23 / Views: 95265

Related News


5 Perfect Ways to Whiten Delicate Things Both Lace and Fine Fabrics
14 interesting, beautiful and useful things that you can do at the cottage
How tasty to marinate the meat on a shish kebab for 10 minutes
How to cook perfect beef steak in a pan
Jennifer Lawrence and Channing Tatum will try themselves in the role of TV presenters
Lilac wedding glasses with their own
Photo frame made of paper Origami do-it-yourself gift