Heart Shaped Box
If you often use scotch, then pay attention to the paper reel, which is inside. Usually, when the tape ends, the piece of paper is sent to the trash. But real needlewomen never throw anything away and skillfully turn unnecessary things at first glance into very necessary things. Today you will learn how to make a box of two reels of scotch in the shape of a heart. It will be a wonderful gift for a girlfriend or daughter on Valentine's Day on February 14. For work you will need the following components:With the help of strong scissors or stationery cut the paper rings anywhere.Using a heat gun, glue the heart-shaped blanks.Make sure that both parts are arranged symmetrically.Now, cut 2 flat hearts out of thick cardboard - this will be the bottom and the lid of the future casket. Put your heart on a cardboard and circle it around the contour.These 2 cardboard hearts should be the result.Wrap them with your favorite wallpaper. You can use fabric, colored, wrapping or crepe paper. Put the cardboard heart, smeared with PVA glue, on the wallpaper from the wrong side and cut with an allowance. Turn the remaining edges on the wrong side.Then cut the heart out of the wallpaper to the desired size and glue on the wrong side. It should turn out blank: bottom and cover.Now go on to wallpapering the side of the reels.Cut off a wide stripe and glue with PVA glue around the perimeter of the volumetric heart.Turn up the edges of the wallpaper in the middle of the base and fix with glue.Cut a thin strip of wallpaper and glue it in the middle of the volumetric heart. This is the middle part of the future box.Now start assembling the parts. A thermogun is used at this stage. To fix the lid, you need to glue a piece of tape to the lid and to the edge of the middle section. Cover the ribbon with wallpaper.Now the lid can open and close freely.Fix the bottom of the casket with a thermo-pistol.Only a decorator remains Vat crafts.On the top and bottom of the side, glue the tape to the wallpaper tone.On the cover place an openwork white ribbon with red and beige knitted flowers.This is the open casket.
- 2 reels of adhesive tape;
- tube of white glue;
- heat gun;
- thick cardboard;
- a piece of wallpaper;
- openwork ribbons, braid and flowers.
Date: 09.10.2018, 09:24 / Views: 64133
Marinated zucchini rolls - a piece of summer at the winter table
Monaco is a small state of luxury
Gel balls at special events
How to survive if you are trying to drown: the advice of the fur seals
PVC windows - comparison of characteristics and properties