How to increase water pressure in a private house

Most of us are used to using centralized water supply. It is convenient, accessible and in a standard situation does not require any additional equipment. Basically, this is really the best way of water supply, without serious drawbacks. The key to safe use of water supply networks is uninterrupted water supply and the optimum pressure in the pipeline. Unfortunately, this is not always the case, especially when several devices are connected at the same time.

Causes of low water pressure

Before eliminating low water pressure, it is necessary to find out the causes of this phenomenon. They can be as follows:
  • Accidents or leaks on the main pipeline;
  • Pipe clogging that prevents normal circulation of water;
  • Fault of filter elements;
  • Intra-house leakage of valves, taps, etc.
In a centralized network, such a reason also prevailsas a conscious reduction in the capacity of the pumping-distribution station. In order to save one or more pumps can be turned off, and the system automatically reduces the total water pressure in the line. And this is despite the fact that there are legal norms for minimum pressure in water supply networks. For primary control, you can install a pressure gauge at the inlet of the pipeline — in a well or basement — that will show the pressure value in real time. It is also worth asking your neighbors for the same problem. If this phenomenon is observed only in your domestic water distribution system, you can resort to the following method.

Solve the problem of low water pressure

If there is a catastrophic pressure in the pipeline, supplement the pumping water distribution station. At the heart of such an assembly is a powerful and waterproof centrifugal pump, capable of providing water even vertical wiring with several consumers. Such a scheme is used in two and three-story houses.
How to increase water pressure in a private house
The pumping station is connected after a storage tank,which, in turn, must be equipped with a locking mechanism, such as float. When a certain level is reached, the nipple mechanism shuts off the water supply with a shut-off valve. The pump station does not require any special connections. The only thing that should be foreseen is lining with cranes at the inlet and outlet of the unit, for dismantling in case of breakage, revision or cleaning of the filter.

Implemented system version

How to increase the water pressure in a private house
Here is a complete system. Input filter coarse.
How to increase the water pressure in a private house
Buck with a float-stop mechanism.
How to increase the water pressure in a private house
Pumping station.
How to increase water pressure in a private house
General view:
How to increase the water pressure in a private house
Fully automatic system. The pump automatically turns on when the pressure drops and also turns off when it is reached.

How to choose a pumping station

Choosing pumping equipment for house wiringwater supply depends on the following factors:
  • Length of the main line;
  • Number of sanitary appliances and water consumption points;
  • Type of main line - horizontal or vertical;
  • The number of people living in the house.
How to increase the pressure of water in a private house
The amount of water per person per day is determined by its consumption for household and business needs, as well as the availability of such communication as sewage. Since there cannot be a single water consumption regime, averaged parameters are taken to determine such indicators, depending on the area of ​​residence and the type of institution - administrative, industrial or residential (urban or suburban).

Date: 09.10.2018, 09:12 / Views: 44283

Related News

Snowman in a shirt
Sand Painting
Dubrovsky Company: wardrobes to order
We decorate the living room in high-tech style with our own hands
Multilayer Jelly
How to choose a lock for the front door
Gift for September 1 in kindergarten