Stages of building a barn on an uneven site

One of the important outbuildings is a barn. For its construction, it is necessary to decide on the site, structure and materials. Not always the building plot will be flat. But, despite some difficulties, a good shed can be built on an uneven section. Construction of a shed should be divided into stages. Stage No. 1. Foundation. For commercial buildings, most often use a strip foundation. It is simple to build, functional and relatively cheap. 1. At the initial stage, you should mark the site and dig a trench along the contour of the shed. The depth and width of the trench will depend on the characteristics of the site and the climate.
 Stages of building a barn
2. Then in the trench you need to make a rubble cushion (to distribute the load on the foundation). To do this, sand is poured at the bottom of the trench. Then make a layer of broken bricks.Void between the bricks again wake up with sand and shed water. When the water in the trench stops being absorbed, then it will be clear that the bottle is ready.
 Shed construction stages
3. Next, formwork must be installed. To make it, you need to knock down wooden boards and use a stapler to wrap them with a film. To install the formwork along the contour boundaries of the future structure. Since the plot is uneven, the formwork will consist of several levels.
 Shed construction stages
4. Reinforcement is required inside the formwork. To do this, in each of the steps of the formwork we place the reinforcement and link it together.
 Stages of building a barn
5. Then you can proceed to concreting. To do this, prepare a solution. Fill each formwork separately. We set a new level of formwork and continue to concrete. When the concrete hardens, the formwork can be removed.
 Stages of the construction of the barn
6. The final effect in the manufacture of the foundation will be its alignment using brickwork.To do this, we calculate the number of bricks required for work, and alternately align each of the steps of the foundation.
 Stages of building a barn
Stages of building a barn
Stage № 2. Construction of walls. Walls for a shed will be made from a cinder block. 1. To begin it is necessary to level out roughnesses on the foundation, and then to lay a waterproofing.
Stages of building a barn
2. Now we start laying walls. We produce the masonry using a cord-pier. Blocks are seated to the level of the cord-pier. We make laying to the desired level.
 Stages of construction of the shed
Stage # 3. Armpoos. To protect the building from external factors of influence, it is necessary to strengthen the structure using a reinforced belt. 1. For the construction of the armpoyas we make assembling of shields from the shawl and twist them together. Install ready-made billboards on the wall.
 Stages of construction of the shed
2. Then you need to put the reinforcement inside the shields and link it.
 Stages of building a barn
3. Fixing the shields.
Stages of building a barn
4. We produce the filling of the reinforced belt with a solution of cement and slag.
 Stages of building a barn
5 After the belt has stiffened, it is necessary to remove the shields.
 Stages of building a barn
Stage 4. Roof. Erection of the roof is time consuming and responsible stage in the work. It is necessary to prepare materials and accessories for ease of operation. 1.Before the roof perimeter it is necessary to expand the bars under the beams.
 Stages of the construction of the barn
2. Under each beam it is necessary to lay waterproofing.
Stages of construction barn
3. Fix the boards with boards.
 Build Stages ki barn
4.We produce the erection of the truss system. To do this, you need beams of 50 * 100 mm.Then we fix the parallel bars between each other using a batten.
 Stages of building a barn
5.Set up the gables.
Shed construction stages
6. In conclusion, it is necessary to cover the roofing with roofing felt. We also install the door and windows.
 Stages of building a barn
Stage No. 5. The blind area. At the end of all the work we produce the blind area. It will protect the building from moisture. 1. To make a blind area, it is necessary to prepare a site. We make a small deepening, install the formwork and fill it with cement mortar.
 Stages of building a barn
2.The formwork can be removed in a few days.
 Shed construction stages
In this form, the barn can be used for your needs.
 Stages of building a barn
 Stages of building a barn

Date: 07.11.2018, 03:10 / Views: 75475

Related News


Laser Hair Removal: Questions and Answers
How to open a sewing accessories shop
We knit socks with an ornament for the smallest
Plates for guests on the table
Smash a glass in a dream, a dream book
Decorative Autumn Wreath
Delicious tangerines you just have not tried Much better than conventional
Folding box Happy Wedding